鋼結構是由鋼制材料組成的結構，是主要的建筑結構類型之一。結構主要由型鋼和鋼板等制成的鋼梁、鋼柱、鋼桁架等構件組成，并采用硅烷化、純錳磷化、水洗烘干、鍍鋅等除銹防銹工藝。濟南輕型鋼結構工程進行時要注意七方面內容，下面來講講吧。

Steel structure is a structure composed of steel materials, which is one of the main types of building structures. The structure is mainly composed of steel beams, steel columns, steel trusses and other components made of profile steel and steel plates, and rust removal and rust prevention processes such as silylation, pure manganese phosphating, water washing and drying, and galvanizing are adopted. Jinan light steel structure project should pay attention to seven aspects. Let's talk about them below.

一、如果有天溝，系桿不能設計到緊貼著柱頂?shù)牟课唬駝t將可能導致無法安裝落水管。另外天溝落水管和系桿以及柱間支撐的位置一定要考慮好，否則要么碰到系桿，要么碰到柱間支撐。

1、 If there is a gutter, the tie rod cannot be designed to be close to the top of the column, otherwise the downpipe may not be installed. In addition, the location of gutter downpipe, tie rod and support between columns must be considered well, otherwise, it will either encounter tie rod or support between columns.

二、水平支撐上花籃螺栓位置的布置要合理，不要過于偏離主梁，應該考慮方便安裝為主。否則工人在安裝時必須探出身子來擰緊花籃螺栓或者用爬梯上去，要么等檁條安裝結束后爬上檁條擰緊花籃螺栓這樣非常不安全。另外也要考慮一下隅撐的布置位置，不要在布置水平支撐時與隅撐打架。

2、 The bolt position of the flower basket on the horizontal support shall be arranged reasonably, and shall not deviate too much from the main beam. It shall be considered to be convenient for installation. Otherwise, the workers must lean out to tighten the flower basket bolts or use a ladder to go up during the installation, or climb up the purlin to tighten the flower basket bolts after the purlin installation, which is very unsafe. In addition, the layout position of the corner brace should also be considered. Do not fight with the corner brace when arranging the horizontal brace.

三、不要片面地在檁條的拉條孔上考慮“受拉邊、受壓邊”等因素，打出上下邊距不等的孔眼，因為安裝時是很容易裝反的，結果反而不利。

3、 Do not unilaterally consider such factors as "tension side and pressure side" on the purlin brace hole, and make holes with unequal upper and lower edge spacing, because it is easy to install inversely during installation, and the result is unfavorable.

四、門窗等的包角板不能一概而論，因為在施工中你無法保證板件位于壓型板的波峰還是波谷

4、 The angle plates of doors and windows can not be generalized, because you can not guarantee that the plates are located at the peak or valley of the profiled plate during construction

五、做大型工程時，深化圖編號一定要考慮到生產、發貨、安裝的便捷。

5、 When doing large-scale projects, the convenience of production, delivery and installation must be taken into account in deepening drawing numbering.

六、對甲方提供的“荷載等數據”一定要了解其真正的意思，因為甲方往往不太懂這些太的東東。我們要做到換位思考，前期工作做好了，后續工作就好開展的多了。

6、 We must understand the true meaning of "load and other data" provided by Party A, because Party A often does not understand these too professional things. We should think in a different position. If we do a good job in the early stage, the follow-up work will be easier to carry out.

七、高強螺栓的位置要合理，要考慮扭斷器及扭矩扳手的施工空間，不要在安裝時，因為空間太小，扭斷器及扭矩扳手無法就位等，導致高強螺栓梅花頭無法擰斷或高強螺栓無法擰緊。

7、 The location of high-strength bolts shall be reasonable, and the construction space of the torque wrench and the torque wrench shall be considered. Do not install the high-strength bolts because the space is too small and the torque wrench and the torque wrench cannot be in place, resulting in the high-strength bolts cannot be screwed off or the high-strength bolts cannot be tightened.

輕型鋼結構各構件或部件之間通常采用焊縫、螺栓或鉚釘連接，是主要的建筑結構類型之一。因其自重較輕，且施工簡便，廣泛應用于大型廠房、橋梁、場館、超高層等領域，所以如果您有采購需求就來我們網站http://m.longepay.com聯系看看吧。

Light steel structure is one of the main types of building structures, which is usually connected by welds, bolts or rivets. Because of its light weight and simple construction, it is widely used in large-scale factories, bridges, venues, super high-rise buildings and other fields, so if you have purchasing needs, please come to our website http://m.longepay.com Contact me and have a look.